Feature image-Hyundai check engine

Hyundai Check Engine Light: Common Causes and Solutions

Discover reasons for Hyundai Check Engine Light

The Hyundai check engine light is a warning that there’s an issue with the car’s engine or emission system. This light shows that the onboard diagnostic system has detected a fault.

The check engine light serves as a critical warning system, notifying drivers of possible issues with the vehicle. The common causes for Hyundai check engine warning lights are faulty oxygen sensors, mass air flow sensors, failing catalytic converters, and more.

In this Dbd guide, we have included all the information on the causes of the Hyundai warning light and its resetting process. Also, we consulted with manufacturers to prepare this complete guide.

What does the Hyundai check engine light mean?

inarticle image-hyundai check engine light- What does the Hyundai check engine light mean_

The check engine light in a Hyundai car will turn on if there is something wrong with the engine or emission system. 

The engine light can indicate problems with various parts, such as the oxygen sensor, gas cap, ignition coil, catalytic converter, or fuel tank. When these issues occur, it can reduce the car’s gas mileage and performance.

If the check engine light is on but steady, the problem is not critical but needs to be fixed as soon as possible. However, if the check engine light starts flashing, immediate attention is required to prevent expensive repairs and further damage to the car.

To avoid severe car problems, it’s essential to address the root cause of the issue as soon as possible. Once the problem is fixed, the check engine light should turn off. 

Neglecting to fix the problem could lead to more severe issues. So, it’s best to take care of the issue immediately to avoid further damage.

Common causes of a Hyundai check engine light

When the Hyundai check engine light comes on, it states various problems related to the engine or emissions system. Here are some of the common causes: [1]Progressive, “Check Engine Light, https://www.progressive.com/answers/what-does-check-engine-light-mean/#:~:text=The%20reasons%20for%20a%20check,costly%20and%20time%2Dconsuming%20repair.”

  • Faulty oxygen sensor
  • Loose or damaged gas cap
  • Malfunctioning ignition coil
  • Failing catalytic converter
  • Problems with the fuel tank or fuel injectors
  • Issues with the spark plugs or spark plug wires
  • Low engine oil pressure or low oil level
  • Defective mass airflow sensor
  • Problems with the exhaust system
  • Faulty engine control module (ECM)

If the check engine light comes on, it could indicate problems affecting a car’s performance and gas mileage. It’s crucial to fix these issues promptly to avoid further damage and ensure the vehicle performs optimally.

What to do when the Hyundai check engine light comes on

If the check engine light in your Hyundai car comes on, it’s crucial to take it to an auto repair shop as soon as possible. 

Ignoring it could cause reduced fuel efficiency and car performance, severely damaging the engine and emission system.

Check the gas cap

inarticle image-hyundai check engine light- Check the gas cap

Firstly, check the gas cap to ensure it’s tight and secure. If it’s not, the check engine light may turn on. Simply tightening the gas cap may resolve the issue.

Have a mechanic diagnose and repair the issue

inarticle image-hyundai check engine light- Have a mechanic diagnose and repair the issue

If the check engine light persists after checking the gas cap, it’s important to have a qualified mechanic diagnose and repair the problem. Driving with the check engine light on could impact the car’s performance and lead to costly repairs.

Preventative maintenance

inarticle image-hyundai check engine light- Preventative maintenance

Regular car maintenance can help prevent issues affecting your car’s performance. Common problems impacting the car’s performance include rough running, misfiring, hesitation when accelerating, and reduced gas mileage, emissions, and power. Therefore, it’s essential to have your car serviced regularly to ensure it’s in good condition and runs smoothly.

By following these steps and addressing the root cause of the problem, you can prevent further damage and maintain optimal vehicle performance.

How to reset the Hyundai check engine light?

When you fix the problem causing the Hyundai warning light, reset the engine light to maintain optimal car performance. Resetting the engine light helps to prevent it from continually flashing, and it helps to identify any new problems.

Here is a detailed guide on how to reset the Hyundai check engine light for the smooth running of the vehicle: 

Step 1: Turn off the engine 

inarticle image-hyundai check engine light- Preventative maintenance

After fixing the issue causing the check engine light to turn on, it’s crucial to take safety precautions before resetting the system. Turn off the engine and allow it to cool down for a few minutes to prevent any risk of burns.

Step 2: Find the battery

inarticle image-hyundai check engine light- Step 2_ Find the battery

Locate the battery, which powers the car’s electrical system. It’s usually located under the hood or in the trunk. On top of that, the exact location can vary depending on the make and model of the car.

Step 3: Disconnect the negative terminal of the battery

inarticle image-hyundai check engine light- Step 3_ Disconnect the negative terminal of the battery

Loosen and remove the negative terminal on the battery using a wrench or a socket set. This step is critical to avoid any accidental shocks or electrical issues. Besides, Remember to avoid touching the positive terminal with the wrench or socket set.

Step 4: Wait for a few minutes

After disconnecting the battery, wait a few minutes to allow any residual electricity in the system to discharge. This step helps ensure the system is fully reset and ready for use.

Step 5: Reconnect the negative terminal

inarticle image-hyundai check engine light- Step 5_ Reconnect the negative terminal

Reconnect the negative terminal on the battery and tighten it securely. Double-check the connection to ensure it’s properly tightened and corrosion-free.

Step 6: Start the engine

Start the engine and let it run for a few minutes to ensure everything works correctly. This step helps to confirm that the engine is running smoothly and the electrical system is functioning correctly.

Step 7: Check the dashboard for any warning lights

inarticle image-hyundai check engine light- Step 7_ Check the dashboard for any warning lights

Check the dashboard for any warning lights. The check engine light should be off, indicating that the system has been reset. Additionally, remember to track the car’s performance and fix any issues to prevent further damage.

Related Stories


FAQs

Can I continue to drive my Hyundai with the check engine light on?

It is not recommended to continue driving your Hyundai with the check engine light on. The check engine light indicates a problem with the vehicle’s engine that you need to fix. Driving with it can cause further damage to the car’s engine and result in more expensive repairs. 

In short, the Hyundai check engine light is a crucial warning system that alerts issues with the vehicle’s engine. We hope our guide helped you with all the information you need about the Hyundai warning light.

About the author

+ posts

DbdPost Staff is a team of writers and editors working hard to ensure that all information on our site is as accurate, comprehensive, and trustworthy as possible. Our goal is always to create the most comprehensive resource directly from experts for our readers on any topic.

References[+]

Scroll to Top